Vista Woven Wood Basic

Colors

Tapes

Edge Banding

Banding will be sewn on both sides and across the bottom of the shade, and on the sides and bottom of the valance.

Banding is made of same material as our cotton/twill tapes.

Available on natural weave shades including specialty items with surcharge.

There are no size or application restrictions.

Not available on Top Down/Bottom Up.

Measure

Type in the room and window location for this shade. This information will help to match the shade with its window.

Inside mount means the blind or shade is installed within the window frame, leaving the outside frame exposed.

Outside mount is a window covering that is mounted outside of the window frame, either on the flat surface (moulding) or in some cases on the wall.

Size Consideration
Minimum blind width:  8"
Minimum blind height:  8"

Maximum blind width:  96"
Maximum blind height:  192"

Options

Where you want the cord to be placed on the shade, left side or right side?

 

Standard Rectangular This cord lock shade allows you to raise and lower the shade by pulling on the single cord. Shade may be stopped at any point.

Waterfall Waterfall shades are made with material attached to the fron of the wood with a valance attached to the back of the wood headrail to hide components. The lift cors will be behind the material.

Top Down Bottom Up (Duofold) This system allows you to raise the shade from the bottom up or lower the shade from the top down.

Continuous Cord Loop This is a continuous cord loop operating system. The cord loop is pulled in a circular motion to raise or lower the shade.

Use multiple shades on one headrail to accommodate wide windows or patio door that can't be covered by a single window treatment. A single headrail makes installation easier and adds a unified look to up to three independently operable window treatments.

Review